Publications

• Chapitre d'ouvrage

Human–Systems Cooperation and Symbiosis in Times of Increasing Autonomous Abilities of Technology

Frank Ole Flemisch, Marie-Pierre Pacaux-Lemoine, Yuichi Saito, Marcel Usai

To understand the challenges of automation, AI, cooperation, and symbiosis of today and of the future, it can make sense to look back into history. Artefacts like the spears of Schoeningen, which were found in 1994 in an open-cast coal mine in the North of Germany, and with an age of three hundred…

Handbook of Sociotechnical Systems, 2, CRC Press, pp.511-526, 2026, A Human Systems Integration Approach, ⟨10.1201/9781003666431-44⟩. ⟨hal-05539337⟩

• Article dans une revue

A Multidisciplinary Approach for Supporting Decision-Making and Repair of Household Appliances

Olivier Sénéchal, Hervé Barry, Patrice Caulier, Etienne Cocquebert, Véronique Flambard, Rajwane Kafrouni, Marion Lauwers, Yves Sallez

While various initiatives have been launched at the European level to promote appliance repair, the consumer’s decision to repair remains pivotal. This decision is influenced by multiple, often conflicting, factors, including economic, technical, and environmental considerations. To assist…

Circular Economy and Sustainability, 2026, 6 (2), pp.32. ⟨10.1007/s43615-026-00754-0⟩. ⟨hal-05513426⟩

• Article dans une revue

Enhancing thermal management of GaN transistors with direct oil jet impingement: Experimental insights for high-power electronics

Anas El Amraoui, Riadh Boubaker, Souad Harmand

This study experimentally investigates the cooling performance of oil jet impingement on high-power GaN transistors, focusing on the effects of nozzle geometry (diameter: 0.5 mm, 1 mm; nozzle-transistor distance: 5 mm, 10 mm) and properties of two fluids (a NewOil-A and Siloil M40). At a flow rate…

International Journal of Thermal Sciences, 2026, 220, pp.110364. ⟨10.1016/j.ijthermalsci.2025.110364⟩. ⟨hal-05297563⟩

• Article dans une revue

Development of a predictive multi-material and multi-physics model based on volume-of-fluid for simulating wire laser additive manufacturing process

Haijie Chang, Yabo Jia, Hans Boungomba, Hakim Naceur, Laurent Dubar

Wire Laser Additive Manufacturing (WLAM) has been widely applied in production technologies for creation of complex geometry and repairing. This process involves numerous coupled physical phenomena, such as laser-material interaction, phase transformations (solid and liquid), fluid dynamics within…

International Journal of Heat and Mass Transfer, 2026, 255, pp.127893. ⟨10.1016/j.ijheatmasstransfer.2025.127893⟩. ⟨hal-05660949⟩

• Article dans une revue

Experimental and numerical study of the incorporation of spent coffee grounds and phase change materials in hollow bricks manufactured by 3D printing

Mohamed El Aabbas, Mustapha Mahdaoui, Abdelhadi Bouchikhi, Mohammed Ahachad, Abdessalam Hijab, Diallo Mamadou Aliou Ii, Brahim Mazian, Mustapha Ouardouz

As part of a sustainable development and circular economy approach, this study proposes the manufacture of ecological bricks by combining extrusion 3D printing, the recovery of spent coffee grounds (SCG) and the incorporation of phase change materials (PCM) into bricks based on local clay.…

Case Studies in Thermal Engineering, 2026, 78, pp.107705. ⟨10.1016/j.csite.2026.107705⟩. ⟨hal-05627823⟩

• Article dans une revue

Neural Architecture Search and Automatic Code Optimization: Techniques, trends, and challenges

Inas Bachiri, Smaïl Niar, Riyadh Baghdadi, Hamza Ouarnoughi

Journal of Systems Architecture, 2026, 171, pp.103645. ⟨10.1016/j.sysarc.2025.103645⟩. ⟨hal-05661264⟩

• Article dans une revue

Enhancing the PI Distribution Network Performance with Hybrid ML Forecasting Techniques Applied to a Case Study of Electronic Products in Thailand

Anirut Kantasa-Ard, Maroua Nouiri

The consumption rate of different products such as electronic devices has drastically increased since the onset of COVID-19 in 2020. This shift in behavior has significantly impacted on the efficiency performance of supply chain in many countries. Using Physical Internet (PI) paradigm as an open…

ECTI-CIT Transactions on Computer and Information Technology, 2026, 20 (1), pp.156-173. ⟨10.37936/ecti-cit.2026201.263669⟩. ⟨hal-05599261⟩

• Communication dans un congrès

Base de données stop walking while talking chez des personnes âgées en bonne santé

Anaïs Chaumeil, Mathias Blandeau, Carlos Vazquez, Rachid Aissaoui, Eric Granger

Objectifs : Le paradigme stop walking while talking proposé en 1997 suggère que les personnes âgées fragiles à risque de chute élevé vont s’arrêter lorsqu’une conversation est entamée avec elles lors de la marche. Chez les personnes âgées en bonne santé (non fragiles), nous faisons l’hypothèse d’un…

SOFAMEA 2026, SOFAMEA, Jan 2026, Mulhouse, France. ⟨hal-05547631⟩

• Communication dans un congrès

Évaluation et comparaison d'une double tâche écologique

Anaïs Chaumeil, Mathias Blandeau

Objectifs : L'étude de la marche pendant une double tâche (DT) permet d'obtenir des informations sur le contrôle moteur, notamment pour des personnes âgées. Or la plupart des DT proposées (compter, réciter l'alphabet, réagir à des perturbations, …) ne sont pas représentatives des DT…

SOFAMEA 2026, SOFAMEA, Jan 2026, Mulhouse, France. ⟨hal-05547030⟩

• Article dans une revue

Optimization of explicit RKN schemes to minimize spurious reflections from shock wave propagation on non-uniform grids

Emmanuel Creusé, Mamadou N'Diaye, Juliette Venel, Cédric Hubert, Nicolas Leconte

The propagation of shock waves on non-uniform grids appears, for example, in some impact problems of the fast dynamics type, where a finer mesh can typically be employed in regions of interest, leading to mesh ratios that can range from 10 to 20 or even more. Unfortunately, unwanted spurious…

International Journal for Numerical Methods in Engineering, 2026, 127 (1). ⟨hal-05144415v2⟩