Publications

• Article dans une revue

Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites

Benjamin Provost, François Boussu, Daniel Coutellier, Daniel Vallée, Fabien Rondot, Julien Nussbaum

Since the emergence of the first armoured vehicles on battlefields, armour shield was mainly centred on conventional metallic materials, widespread solutions nowadays. For a long time, weight reduction in armoured protection, which represents the largest part of the vehicle’s overall weight, has…

Journal of Industrial Textiles, 2013, ⟨10.1177/1528083713498914⟩. ⟨hal-03644392⟩

• Communication dans un congrès

Des Honeypots Mobiles Pour La Sécurité Proactive des Réseaux Ad Hoc Véhiculaires (VANETs)

Dhavy Gantsou, Patrick Sondi Obwang

Colloque international TELECOM’2013 & 8ème JFMMA, 2013, Marrakech, Maroc. ⟨hal-03577439⟩

• Article dans une revue

Investigation of the performance of modified TCM scheme for the protection of SPIHT-based compressed images over fading channel

Mohamed Ben Aissa, Abdesselam Bassou, Mohammed Beladgham, Abdelmalik Taleb-Ahmed, Abdelmounaim Moulay Lakhdar

In this paper, a new variant of trellis-coded modulation with Ungerboeck-Gray mapping 'TCM-UGM' is presented for spectral efficiency of 2 bit/s/Hz. The performance of this encoding scheme is investigated over Rayleigh fading channel. The simulation result, using 16-state TCM-UGM encoder,…

International Review on Computers and Software (IRECOS), 2013, 8 (1), pp.271-276. ⟨hal-03507984⟩

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature…

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening…

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩

• Communication dans un congrès

Application of a Co-evolutionary Genetic Algorithm to solve the Periodic Railway Timetabling Problem

Luis Diego Arenas Pimentel, Rémy Chevrier, Clarisse Dhaenens, Said Hanafi, Joaquin Rodriguez

In train operations, a timetable is used to establish the departure and arrival times for the trains at the stations or other relevant locations in the rail network or a subset of this network. The elaboration of a timetable responds to the commercial needs of the customers, for both passenger and…

IESM 2013, 5th international conference on industrial engineering and system management, Oct 2013, Rabat, Morocco. 10p. ⟨hal-00909588⟩

• Communication dans un congrès

Sociotechnical systems resilience : a dissonance engineering point of view

Jean-René Ruault, Frédéric Vanderhaegen, Christophe Kolski

Resilience deals with the capacity to adjust itself face disturbing events, to cope with unforeseeable conditions. Resilience is based upon the dynamic process of "visual piloting". The gap between the specified task and the done activity generates dissonance between beliefs and…

12th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, United States. pp.149-156, ⟨10.3182/20130811-5-US-2037.00042⟩. ⟨hal-03384711⟩

• Article dans une revue

A three-dimensional study of electronic component cooling using a flat heat pipe

Hamdy Hassan, Souad Harmand

In this article, a three-dimensional thermal and hydrodynamic numerical model using a flat heat pipe (vapor chamber) is proposed for cooling of electronic components. The heat pipe is composed of a vapor region sandwiched between two wick regions, which are covered by two flat copper plates. A…

Heat Transfer Engineering, 2013, 34 (7), pp.596-607. ⟨10.1080/01457632.2013.730426⟩. ⟨hal-03531174⟩

• Article dans une revue

A comprehensive blank development method for forming sheet metal parts

Jianjun Wu, Xin Wu, Liangcai Deng, Hakim Naceur

For some shortcomings in the use of standard radial length development in the blank development for forming sheet metal parts, an improved radial length normal spreading approach considering outside normal direction is developed to resolve blank development in sheet metal forming. Moreover, a…

International Journal of Advanced Manufacturing Technology, 2013, 13 (1), pp. 1-13. ⟨10.1007/s00170-013-5502-z⟩. ⟨hal-03520429⟩

• Communication dans un congrès

Alternative Action Plan Generator (A2PG) for elaboration an anticipated feedback

Wided Ben Yahia, Nicolas Tricot, Philippe Polet, Frédéric Vanderhaegen

This paper proposes an original Alternative Action Plan Generator – A2PG, which predicts possible alternatives of the human action plans in which the human operators do not respect the safety rules. These alternatives build an anticipated feedback. Five parameters characterize A2PG. The creation of…

12th IFAC Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, Nevada, United States. pp.296-303, ⟨10.3182/20130811-5-US-2037.00069⟩. ⟨hal-03612502⟩