Publications

• Article dans une revue

Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy

Jérémie Bouquerel, Bandiougou Diawara, André Dubois, Mirentxu Dubar, Jean-Bernard Vogt, Denis Najjar

The microstructure of 6082 aluminium alloy in artificial aged condition was investigated before and after cold forming. The cold forming process was performed at room temperature with and without lubricant. An in depth microstructure investigation has been carried out through electron backscatter…

Materials & Design, 2015, 68, pp.245-258. ⟨10.1016/j.matdes.2014.12.005⟩. ⟨hal-01204798⟩

• Article dans une revue

Analysis of the unsteady behavior of an electrical heater using the lock-in technique: Comparison of theory and experiments

Sylvain Lalot, Bernard Desmet

In the recent years, the lock-in technique has been tested in thermal engineering. Due to its high sensitivity for signal analysis, it has great potentialities for drift detection. Here the aim is more particularly fouling detection. The key point for this technique is the choice of the angular…

Applied Thermal Engineering, 2015, 79, pp.37-43. ⟨10.1016/j.applthermaleng.2015.01.024⟩. ⟨hal-03448683⟩

• Article dans une revue

Brightness versus roughness: a multiscale approach

Maxence Bigerelle, Julie Marteau, C Paulin

A link between roughness and brightness is sought for brass specimens that were superfinished, sandblasted and brushed. Only the blasting conditions are varied in order to get different roughness and brightness. First, a relation between roughness and brightness is sought for specimens that were…

Surface Topography: Metrology and Properties, 2015, 3 (1), pp.015004. ⟨10.1088/2051-672X/3/1/015004⟩. ⟨hal-02968728⟩

• Article dans une revue

Controller Design for TS Models Using Delayed Nonquadratic Lyapunov Functions

Zsofia Lendek, Thierry-Marie Guerra, Jimmy Lauber

In the last few years, nonquadratic Lyapunov functions have been more and more frequently used in the analysis and controller design for Takagi-Sugeno fuzzy models. In this paper, we developed relaxed conditions for controller design using nonquadratic Lyapunov functions and delayed controllers and…

IEEE Transactions on Cybernetics, 2015, 45 (3), pp.453-464. ⟨10.1109/TCYB.2014.2327657⟩. ⟨hal-03428900⟩

• Article dans une revue

Relation between surface hardening and roughness induced by ultrasonic shot peening

Julie Marteau, Maxence Bigerelle

This paper is focused on the identification of a relation between surface hardening and roughness induced by ultrasonic shot peening. A method that dissociates the influence of roughness from the value of the true macroscopic hardness is applied to AISI 316L stainless steel specimens treated using…

Tribology International, 2015, 83, pp.105-113. ⟨10.1016/j.triboint.2014.11.006⟩. ⟨hal-02964754⟩

• Poster de conférence

A Reactive Decision Support System for Freight Intermodal Transportation Services

Yunfei Wang, Ioana Bilegan, Abdelhakim Artiba

Matinée des Chercheurs 2015, Mar 2015, Mons, Belgium. ⟨hal-03396695⟩

• Article dans une revue

Wind potential evaluation around isolated pitched roof buildings

Nachida Bourabaa, Eric Delacourt, Jean-Luc Menet

The knowledge of wind field characteristics around buildings is very useful in a variety of applications such as energy supply by means of a domestic wind turbine. In this paper, results of a wind study around a conventional pitched roof building are given in order to choose the best location and…

Journal of Renewable and Sustainable Energy, 2015, 7 (2), pp.023111. ⟨10.1063/1.4915288⟩. ⟨hal-03452016⟩

• Communication dans un congrès

A Parallel And Scalable Multi-FPGA based Architecture for High Performance Applications

Venkatasubramanian Viswanathan, Rabie Ben Atitallah, Jean-Luc Dekeyser, Benjamin Nakache, Maurice Nakache

Several industrial applications are becoming highly sophisticated and distributed as they capture and process real-time data from several sources at the same time. Furthermore, availability of acquisition channels such as I/O interfaces per FPGA, also dictates how applications are partitioned over…

The 2015 ACM/SIGDA International Symposium on Field-Programmable Gate Arrays, FPGA '15 , Feb 2015, Monterey, California, United States. ⟨10.1145/2684746.2689115⟩. ⟨hal-01247133⟩

• Thèse

Self-organized and evolvable holonic architecture for manufacturing control, Proposition d’une architecture holonique auto-organisée et évolutive pour le pilotage des systèmes de production

José Barbosa

The manufacturing world is being deeply challenged with a set of ever demanding constraints where from one side, the costumers are requiring products to be more customizable, with higher quality at lower prices, and on other side, companies have to deal on a daily basis with internal disturbances…, Le monde des entreprises est profondément soumis à un ensemble de contraintes toujours plus exigeantes provenant d’une part des clients, exigeant des produits plus personnalisables, de qualité supérieure et à faible coût, et d’autre part des aléas internes auxentreprises, comprenant les pannes…

Chemical and Process Engineering. Université de Valenciennes et du Hainaut-Cambresis, 2015. English. ⟨NNT : 2015VALE0008⟩. ⟨tel-01137643v2⟩

• Chapitre d'ouvrage

A Model for Manufacturing Scheduling Optimization Through Learning Intelligent Products

Wassim Bouazza, Yves Sallez, Nassima Aissani, Bouziane Beldjilali

Modern manufacturing systems need to be increasingly flexible, agile and adaptable. In this paper, we propose an original approach combining ac-tive/intelligent product architectures with learning mechanisms to ensure flexi-bility and agility of the entire manufacturing system. Using learning…

Service Orientation in Holonic and Multi-agent Manufacturing, 594, Springer International Publishing, pp.233-241, 2015, Studies in Computational Intelligence, ⟨10.1007/978-3-319-15159-5_22⟩. ⟨hal-03404089⟩